Atmospheric pressure (direct)
8 articles found.
-
- Process gas available
- Atmospheric pressure (direct)
- Gas-less processing
- Painting / Plating
- Adhesion / Bonding
- Cleaning / Sterilization
- For manufacturing
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Atmospheric Pressure Direct Plasma Film Crimping Machine D500-HR
Equipment capable of simultaneously processing two films by direct plasma using dielectric barrier discharge and immediately afterward thermo-compression bonding.
Atmospheric Pressure Direct Plasma Film Crimping Machine D500-HR
Equipment capable of simultaneously processing two films by direct plasma using dielectric barrier discharge and immediately afterward thermo-compression bonding.
-
- Atmospheric pressure (direct)
- Gas-less processing
- Painting / Plating
- Adhesion / Bonding
- Cleaning / Sterilization
- For experimental use
- For manufacturing
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Direct type atmospheric pressure plasma device D300-TB
No gas introduction required, surface modification with air is possible. Wide slit irradiation is possible (up to 1000mm). High processing effect: removal of organic matter from FPD glass substrates (cleaning). Improved wettability (pre-treatment for coating/adhesion). Film surface modification.
Direct type atmospheric pressure plasma device D300-TB
No gas introduction required, surface modification with air is possible. Wide slit irradiation is possible (up to 1000mm). High processing effect: removal of organic matter from FPD glass substrates (cleaning). Improved wettability (pre-treatment for coating/adhesion). Film surface modification.
-
- Atmospheric pressure (direct)
- Gas-less processing
- Painting / Plating
- Adhesion / Bonding
- Cleaning / Sterilization
- For experimental use
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Tabletop direct atmospheric pressure plasma device TK-50
Low price. Small size. Simple structure. Uniformity. Processing efficiency. Almost no running costs. For continuous processing of films, etc. using atmospheric pressure plasma.
Tabletop direct atmospheric pressure plasma device TK-50
Low price. Small size. Simple structure. Uniformity. Processing efficiency. Almost no running costs. For continuous processing of films, etc. using atmospheric pressure plasma.
-
- Atmospheric pressure (direct)
- Gas-less processing
- Painting / Plating
- Adhesion / Bonding
- Cleaning / Sterilization
- For experimental use
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Tabletop atmospheric pressure asher device SS-50
Handheld type for easy handling. Space-saving desktop control box. Hydrophilicity depends on the gas used. Plasma is generated with air. The handheld type allows treatment of uneven surfaces. Operates on a 100 VAC outlet. Ultra-lightweight with a 4kg control box available. Wire bonding is ideal for improving strength! Also suitable for biotechnology and medical fields.
Tabletop atmospheric pressure asher device SS-50
Handheld type for easy handling. Space-saving desktop control box. Hydrophilicity depends on the gas used. Plasma is generated with air. The handheld type allows treatment of uneven surfaces. Operates on a 100 VAC outlet. Ultra-lightweight with a 4kg control box available. Wire bonding is ideal for improving strength! Also suitable for biotechnology and medical fields.
-
- Atmospheric pressure (direct)
- Gas-less processing
- Painting / Plating
- Adhesion / Bonding
- For manufacturing
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Brush-type atmospheric pressure plasma surface processing equipment: get a command of (GaCo-200)
Stainless steel wire brushes allow flexible plasma treatment even on curved surfaces!
Brush-type atmospheric pressure plasma surface processing equipment: get a command of (GaCo-200)
Stainless steel wire brushes allow flexible plasma treatment even on curved surfaces!
-
- Atmospheric pressure (direct)
- Powder processing
- Gas-less processing
- Painting / Plating
- Dispersion / Cohesion improvement
- For experimental use
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Liquid plasma system DKN-128
Improved powder dispersion by plasma in liquid. Improved production efficiency through continuous processing. Plasma treatment while breaking up agglomerations by impact group. For pre-treatment of powder plating.
Liquid plasma system DKN-128
Improved powder dispersion by plasma in liquid. Improved production efficiency through continuous processing. Plasma treatment while breaking up agglomerations by impact group. For pre-treatment of powder plating.
-
- Atmospheric pressure (direct)
- Powder processing
- Gas-less processing
- Painting / Plating
- Dispersion / Cohesion improvement
- For experimental use
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Atmospheric pressure liquid surface powder plasma processing equipment PPU-800 for full-scale research
Powders do not scatter because the process is windless. Powders and liquids that were previously not mixed at all are mixed together. This promotes the cohesion of difficult-to-form materials, making them easier to process.
Atmospheric pressure liquid surface powder plasma processing equipment PPU-800 for full-scale research
Powders do not scatter because the process is windless. Powders and liquids that were previously not mixed at all are mixed together. This promotes the cohesion of difficult-to-form materials, making them easier to process.
-
- Atmospheric pressure (direct)
- Powder processing
- Gas-less processing
- Painting / Plating
- Dispersion / Cohesion improvement
- For experimental use
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)
Atmospheric pressure liquid surface powder plasma processing equipment ASS-400
Mixed with liquid by surface treatment of powder without surfactant. Pretreatment: Pretreatment of fillers and calcined powders. Others: For development of hybrid materials.
Atmospheric pressure liquid surface powder plasma processing equipment ASS-400
Mixed with liquid by surface treatment of powder without surfactant. Pretreatment: Pretreatment of fillers and calcined powders. Others: For development of hybrid materials.
Search by Category
Search by Application
- Hydrophobic / Lipophilic (under development)
- Hydrophobic / Lipophobic (under development)
- Painting / Plating
- Adhesion / Bonding
- Dispersion / Cohesion improvement
- Cultivation / Dental Care
- Cleaning / Sterilization
- Etching
- Thin film formation
- Hydrophobic
- Plasma durability test
- Lipophobic / Stain repellency (under development)
- Lipophilic (under development)
- For experimental use
- For manufacturing
- Processing to special shapes (film, powder, tube, three-dimensional objects, etc.)